Specifications

ST1kVoiceApp ASM Voice Application Status
SPECTRUM Enterprise Manager 147 of 194 Ascom TimePlex ST-1000
FaxRelay
A read-only string. The bit mask is as follows:
• bits 0 (lsb) through 4 are modulation type
- 0 is V.21 300 bps
- 1 is V.27 2400 bps
- 2 is V.27 4800 bps
- 3 is V.29 7200 bps
- 4 is V.29 9600 bps
• bit 5 is reserved
• bit 6 is id demodulation (0-off, 1-on)
• bit 7 (msb) is modulation (0-off, 1-on)
(This field may not be supported in your release of
the product.)
PortPacket
A read-only string. The bit mask is as follows:
• bit 0 (lsb) is sync init (1-initializing)
• bit 1 is sync acq (1-sync searching)
• bit 2 is sync ver (1-verifying sync)
• bit 3 is sync mon (1-normal)
• bit 4 is sync loss (1-frame sync loss)
• bit 5 is sync loss time-out (1-occurred)
• bit 6 is reserved
• bit 7 (msb) is HBER (1-BER > 10)
(This field may not be supported in your release of
the product.)
SubratePhasor
A read-only string. All bits zero indicates normal.
The bit mask is as follows:
• bit 1 (lsb) is receive phasor underflow
• bit 2 is receive phasor overflow
• bits 3 through 8 are reserved
• bit 9 is transmit phasor underflow
• bit 10 is transmit phasor overflow
• bits 11 through 16 are reserved
The value will be
x8080 if the port does not have a
phasor.
SignalingLOS
The signaling LOS status. The possible values are
inSync or los .
FrameLOS
The frame LOS status. The possible values are
inSync or los .
CelpNetSigSt
A read-only field having the value
indeterminate , st , or link .
• When CelpNetSigMd is set to auto (auto
detection mode), this field indicates whether
the CELP/ATC channel connected is running
in either LINK (5 byte) or ST (8 byte) mode.
• If autodetection is disabled, this field reflects
the value of CelpNetSigMd.