Specifications
Table Of Contents
- Title
- Notice
- Contents
- Introduction
- Performance Views
- Interface Device View
- Device Topology View
- Applications Views Summary
- St1kNodeApp
- ST1kAccessApp
- ST1kModuleApp
- ST1kLgmApp
- ST1kFsmApp
- ST1kSgmApp
- ST1kAd10App
- ST1kRtmApp
- ST1kChnlApp
- ST1kINLApp
- ST1kFrmRlyApp
- ST1kBundleApp
- ST1kE1PortApp
- ST1kT1PortApp
- ST1kSdmPortApp
- ST1kAsmApp
- ST1kVoiceApp
- ST1kAsmX50App
- ST1kDsmApp
- ST1kDsmPortApp
- ST1kAlarmApp
- Device Configuration View
- Model Information Views
- Index
ST1kVoiceApp ASM Voice Application Status
SPECTRUM Enterprise Manager 146 of 194 Ascom TimePlex ST-1000
canceller performance. However, if the tail length
is set too small, it will make the echo cancellation
ineffective. This field is ignored for PCM and
CELP/ATC voice channels.
ASM Voice Application Status
This view provides the following fields.
ChannelAddr
The address of the T1M/E1M bundle that is being
used by this port while connected. If it is
disconnected, the field displays an error.
PortAddr
The ASM voice port physical address, in the
format nest:slot:port.
TrkGrpAddr
The address of the trunk group to which this ASM
voice port is assigned.
Engine
The ASM module DSP number allocated for this
voice port.
PacketSize
The size of compressed data block. (This field may
not be supported in your release of the product.)
BlockSize
The size of uncompressed data block. (This field
may not be supported in your release of the
product.)
EchoCancel
A read-only string. The bit mask is as follows:
• bit 0 (lsb) is divergence (0-normal, 1-diverge)
• bit 1 is reserved
• bit 2 is filter (0-disabled, 1-enabled)
• bit 3 is adaptation (0-frozen, 1-adapting)
• bits 4 through 7 (msb) are reserved.
(This field may not be supported in your release of
the product.)
DTMFRelay
A read-only string. The bit mask is as follows:
• bits 0 (lsb) through 3 are detected character
- 0 through 9 is digit 0 through 9
- 10 is the character *
- 11 is the character #
- 12 through 15 are characters A through D
• bits 4 and 5 are digit type (00 - DTMF)
• bit 6 is digit generation (0-off, 1-on)
• bit 7 (msb) is digit detect (0-none, 1-detected)
(This field may not be supported in your release of
the product.)










