Specifications

ManualsBrandsCabletron Systems ManualsConsumer electronicsST-500

141

142

143

144

145

146

147

148

149

150

Table Of Contents

Title
Notice
Contents
Introduction
- Purpose and Scope
- Required Reading
- Supported Devices
- The SPECTRUM Model
Performance Views
- Port Performance View
- Device Performance View
Interface Device View
- Interface Icons
- Interface Icon Labels
- Interface Status View
- Interface Address Translation Table
Device Topology View
Applications Views Summary
St1kNodeApp
- Node Administration
- System Profile Administration
- Partition and Softload Administration
- Node Status
- Nest Administration
- Channel Profile Administration
- Community Administration
- Hardware Resource Engine Administration
  - Hardware Resource Engine Information
  - Hardware Resource Engine Configuration
ST1kAccessApp
- Access Control
- CPI/Modem Access Control
  - CPI Port Configuration
  - Modem Port Configuration
- Root Node IP Access Information
- Root Node IP Access Config
ST1kModuleApp
- Slot Configuration
- Slot Status
- NCP Module Status
- NCP Flash PROM Status
- Port Status Administration
ST1kLgmApp
- LGM Port Administration
- LGM Routing Table
- LGM Resource Administration
- LGM Translation Administration
- LGM Module Status
- LGM Port Status
- LGM Port Statistics
ST1kFsmApp
- FSM Module Status
- FSM-16 Resource Administration
- FSM-64 Resource Administration
ST1kSgmApp
- Sgm/Ag Module Status
- SAF Status Administration
ST1kAd10App
- AD 10 Configuration Administration
- AD 10 Status Administration
- AD 10 Statistics
ST1kRtmApp
- RTM Port Administration
  - Rtm Port Table
  - AD-3 and AD-7 Port Configuration Table
- RTM Specific Status
- RTM Port Application Status
- RTM Port Statistics
ST1kChnlApp
- Network/Nodal Voice Profile Administration
  - Networkwide Voice Profile Table
  - Nodal Voice Profile Table
- TDM Channel Configuration
- General Channel Status
- Trunk Group Application Status
- Trunk Group Contents Status
- Packet Channel Source- Destination Statistics Administration
- Packet Channel Bypass Statistics Administration
ST1kINLApp
- Inter Nodal Link Configuration
- Inter Nodal Link Status
- Inter Nodal Link Contents Status
- Inter Nodal Link Statistics
ST1kFrmRlyApp
- Packet Channel Status/Ping View
  - Packet Channel Status Table
  - Packet Channel Ping Table
- Frame Relay Channel Administration View
- Frame Relay Port Administration View
- Packet Port Statistics View
ST1kBundleApp
- Bundle Configuration
- Bundle Status
ST1kE1PortApp
- E1M Port Configuration
- E1M Port Statistics
ST1kT1PortApp
- T1M Port Configuration
- T1M Port Statistics
ST1kSdmPortApp
- SDM Port Configuration View
ST1kAsmApp
- ASM Resource Utilization
- ASM Module Status
- ASM Engine Status
- Application Status
ST1kVoiceApp
- ASM Voice Application Administration
- ASM Voice Application Status
- ASM Voice Port Statistics
ST1kAsmX50App
- X50 Configuration Administration
  - X50 Port Administration
  - X50 Circuit Administration
- ASM X50 Status
  - X50 Port Status Administration
  - X50 Circuit Status Administration
- ASM X50 Statistics
ST1kDsmApp
- DSM Module Specific Entry
  - Module Implementation Administration
  - Module CDR Implementation Administration
- DSM Module Specific Status
- DSM Module Statistics
ST1kDsmPortApp
- DSM Port Configuration
- DSM Port Specific Administration
- DSM D-Channel Port Statistics
ST1kAlarmApp
- Alarm Partition Header/System Profile
- Alarm Log Table
Device Configuration View
Model Information Views
Index
- A
- B
- C
- D
- F
- G
- H
- I
- L
- M
- N
- O
- P
- Q
- R
- S
- T

ST1kVoiceApp ASM Voice Application Administration

SPECTRUM Enterprise Manager 143 of 194 Ascom TimePlex ST-1000

output on any ASM voice ports that use this

trunk group.

EchoCancel

A read-write ﬁeld having a value of

enable

(the

default value) or

disable

and controls the echo

cancellation on any ASM voice ports that use this

trunk group. Changes will not affect channels

that are already connected.

NonLinear

A read-write ﬁeld that has the value

enable

(the

default value) or

disable

and controls the non-

linear processing inside the echo canceller on any

ASM voice ports that use this trunk group. The

non-linear processor removes residual echo from

the returned signal. Changes will not affect

channels that are already connected.

DataMode

A read-write ﬁeld that has the value

enable

(the

default value) or

disable

and controls the 2100

Hz detection logic and data mode operation with

the ATC vocoder on any ASM voice ports that use

this trunk group. Changes will not affect

channels that are already connected.

TxPCMGain

A read-write ﬁeld that controls the transmit PCM

gain on any ASM voice ports that use this trunk

group. The range is deﬁned from -33.0 to +18.0

dB with 0.2 dB increments. The default is 0 dB.

Changes will not affect channels that are already

connected.

RxPCMGain

A read-write ﬁeld that controls the receive PCM

gain on any ASM voice ports that use this trunk

group. The range is deﬁned from -33.0 to +18.0

dB with 0.2 dB increments. The default is 0 dB.

Changes will not affect channels that are already

connected.

VocoderEnable

A read-write ﬁeld having a value of

normal

(the

default value) or

disable

. Changes will not affect

channels that are already connected. This ﬁeld

controls the vocoder mode on any ASM voice

ports that use this trunk group. This ﬁeld is not

applicable in ADPCM mode.

SigIdlePttrn

A read-write ﬁeld having the possible values listed

below, with the default being

a0-b0-c0-d0

a0-b0-c0-d0 a0-b0-c0-d1 a0-b0-c1-d0

a0-b0-c1-d1 a0-b1-c0-d0 a0-b1-c0-d1

a0-b1-c1-d0 a0-b1-c1-d1 a1-b0-c0-d0

a1-b0-c0-d1 a1-b0-c1-d0 a1-b0-c1-d1