Specifications

ManualsBrandsCabletron Systems ManualsConsumer electronicsST-500

141

142

143

144

145

146

147

148

149

150

Table Of Contents

Title
Notice
Contents
Introduction
- Purpose and Scope
- Required Reading
- Supported Devices
- The SPECTRUM Model
Performance Views
- Port Performance View
- Device Performance View
Interface Device View
- Interface Icons
- Interface Icon Labels
- Interface Status View
- Interface Address Translation Table
Device Topology View
Applications Views Summary
St1kNodeApp
- Node Administration
- System Profile Administration
- Partition and Softload Administration
- Node Status
- Nest Administration
- Channel Profile Administration
- Community Administration
- Hardware Resource Engine Administration
  - Hardware Resource Engine Information
  - Hardware Resource Engine Configuration
ST1kAccessApp
- Access Control
- CPI/Modem Access Control
  - CPI Port Configuration
  - Modem Port Configuration
- Root Node IP Access Information
- Root Node IP Access Config
ST1kModuleApp
- Slot Configuration
- Slot Status
- NCP Module Status
- NCP Flash PROM Status
- Port Status Administration
ST1kLgmApp
- LGM Port Administration
- LGM Routing Table
- LGM Resource Administration
- LGM Translation Administration
- LGM Module Status
- LGM Port Status
- LGM Port Statistics
ST1kFsmApp
- FSM Module Status
- FSM-16 Resource Administration
- FSM-64 Resource Administration
ST1kSgmApp
- Sgm/Ag Module Status
- SAF Status Administration
ST1kAd10App
- AD 10 Configuration Administration
- AD 10 Status Administration
- AD 10 Statistics
ST1kRtmApp
- RTM Port Administration
  - Rtm Port Table
  - AD-3 and AD-7 Port Configuration Table
- RTM Specific Status
- RTM Port Application Status
- RTM Port Statistics
ST1kChnlApp
- Network/Nodal Voice Profile Administration
  - Networkwide Voice Profile Table
  - Nodal Voice Profile Table
- TDM Channel Configuration
- General Channel Status
- Trunk Group Application Status
- Trunk Group Contents Status
- Packet Channel Source- Destination Statistics Administration
- Packet Channel Bypass Statistics Administration
ST1kINLApp
- Inter Nodal Link Configuration
- Inter Nodal Link Status
- Inter Nodal Link Contents Status
- Inter Nodal Link Statistics
ST1kFrmRlyApp
- Packet Channel Status/Ping View
  - Packet Channel Status Table
  - Packet Channel Ping Table
- Frame Relay Channel Administration View
- Frame Relay Port Administration View
- Packet Port Statistics View
ST1kBundleApp
- Bundle Configuration
- Bundle Status
ST1kE1PortApp
- E1M Port Configuration
- E1M Port Statistics
ST1kT1PortApp
- T1M Port Configuration
- T1M Port Statistics
ST1kSdmPortApp
- SDM Port Configuration View
ST1kAsmApp
- ASM Resource Utilization
- ASM Module Status
- ASM Engine Status
- Application Status
ST1kVoiceApp
- ASM Voice Application Administration
- ASM Voice Application Status
- ASM Voice Port Statistics
ST1kAsmX50App
- X50 Configuration Administration
  - X50 Port Administration
  - X50 Circuit Administration
- ASM X50 Status
  - X50 Port Status Administration
  - X50 Circuit Status Administration
- ASM X50 Statistics
ST1kDsmApp
- DSM Module Specific Entry
  - Module Implementation Administration
  - Module CDR Implementation Administration
- DSM Module Specific Status
- DSM Module Statistics
ST1kDsmPortApp
- DSM Port Configuration
- DSM Port Specific Administration
- DSM D-Channel Port Statistics
ST1kAlarmApp
- Alarm Partition Header/System Profile
- Alarm Log Table
Device Configuration View
Model Information Views
Index
- A
- B
- C
- D
- F
- G
- H
- I
- L
- M
- N
- O
- P
- Q
- R
- S
- T

ST1kVoiceApp ASM Voice Application Administration

SPECTRUM Enterprise Manager 142 of 194 Ascom TimePlex ST-1000

channel data rate for any voice subrate

connections using this voice trunk group.

• For channels using a CELP compression

algorithm, only speeds of 5.333, 7.2, 8, and

9.6 will be supported.

• For channels using the ATC compression

algorithm, only the speeds between 7.466

Kbps and 32 Kbps will be supported.

• For channels using the ADPCM compression

algorithm, only the speeds 31.733 and 32.000

Kbps will be supported.

SignalingType

A read-write ﬁeld having a value of

none

(the

default value),

abcd

ac15-dtmf

, or

ac15-

. Changes will not affect channels that are

already connected. This is the type of signaling

used by the T1M/E1M bundles that connect to

voice ports using this trunk group.

DTMFRelay

A read-write ﬁeld having a value of

enable

(the

default value) or

disable

. Changes will not affect

channels that are already connected. This ﬁeld

controls the DTMF relay on any ASM voice ports

that use this trunk group. When enabled, DTMF

signals are transferred through the connection.

This ﬁeld is not applicable in the ADPCM mode.

FaxRelay

A read-write ﬁeld having a value of

enable

(the

default value) or

disable

. Changes will not affect

channels that are already connected. This ﬁeld

controls the fax relay on any ASM voice ports that

use this trunk group. When enabled, fax

operation will be supported over the connection.

This ﬁeld is not applicable in the ADPCM mode.

NSFMode

A read-write ﬁeld having a value of

enable

(the

default value) or

disable

. Changes will not affect

channels that are already connected. This ﬁeld

controls the non-standard fax mode on any ASM

voice ports that use this trunk group. This ﬁeld is

not applicable in the ADPCM mode.

AudSrcMode

A read-write ﬁeld having a value of

silence

toneDMW

or normal

(the default value). Changes

will not affect channels that are already

connected. This ﬁeld controls the transmit audio

source on any ASM voice ports that use this

trunk group.

AudOutMode

A read-write ﬁeld having a value of

silence

toneDMW

or normal

(the default value). Changes

will not affect channels that are already

connected. This ﬁeld controls the receive audio