Specifications

ST1kVoiceApp ASM Voice Application Administration
SPECTRUM Enterprise Manager 141 of 194 Ascom TimePlex ST-1000
port set in Port. If the value of this field is the
same as LowElement, this voice port is not a
contention port. If the value of this field is less
than LowElement, this trunk group is invalid
and any attempt to connect a channel using this
trunk group will fail.
RemoteNodeID
The node address. Changes will not affect
channels that are already connected. This is the
node that any voice subrate channel using this
trunk group will connect to. It may be the same
as the local node that this voice trunk group is
defined on.
RemoteAddr
The port address. Changes will not affect
channels that are already connected. This is the
trunk group used for the remote end of any voice
subrate channel using this trunk group.
PartitionID
A read-write value ranging from
1 through 1023 .
Changes will not affect channels that are already
connected. This is the partition ID of this trunk
group and is used to enforce security on a shared
node.
CompressMode
A read-write field having a value of
tCelp (the
default value),
atc , or adpcm . Changes will not
affect channels that are already connected. This
field defines which compression algorithm to use
for voice channels connected using this voice
trunk group.
GrpSpeed
A read-write field having one of the values listed
below. The default value is
b8000 .
Changes will not affect channels that are already
connected. This field represents the compressed
b5333 b7200 b7466 b8000
b8533 b9066 b9600 b10133
b10666 b11200 b11733 b12266
b12800 b13333 b13866 b14400
b14933 b15466 b16000 b16533
b17066 b17600 b18133 b18666
b19200 b19733 b20266 b20800
b21333 b21866 b22400 b22933
b23466 b24000 b24533 b25066
b25600 b26133 b26666 b27200
b27733 b28266 b28800 b29333
b29866 b30400 b30933 b31466
b31733 b32000 b36000