Specifications

Interface Device View Interface Icon Labels
SPECTRUM Enterprise Manager 14 of 194 Ascom TimePlex ST-1000
Interface Icon Labels
The following paragraphs describe the Interface
icon labels and the views accessible from the
associated double-click zone, when available.
These views are also accessible from the Icon
Subviews menu.
Interface Label
This label displays the interface (port) number.
Administrative Status Label
This label displays the status of the interface for
the primary application selected. The possible
states are ON, OFF, and Test. Double-click this
label to open the Interface Status View on
Page 15.
Interface Type Label
This label displays the interface type. Double-
click this label to open the Default GIB view,
which shows the model type name.
MAC Address Label
This label displays the address of the ST-1000
interface. Double-click this label to open the
Interface Address Translation Table on Page 15.
Address Label
This label displays the address or mask. The
default is the address. Double-click this label to
open the Secondary Address Panel, which is
described in SPECTRUM Views .
Change this label’s display as follows:
1
Double-click the label to open the Secondary
Address Panel.
2
Select the address you wish to display and
click OK .
Gauge Label
This label displays the performance statistic that
you set in the Gauge Control Panel, which is
accessed from the Interface Options Panel. (Refer
to SPECTRUM Views .) Double-click this label to
open the Device Performance view.