Specifications

ST1kT1PortApp T1M Port Configuration
SPECTRUM Enterprise Manager 131 of 194 Ascom TimePlex ST-1000
Bundle Map
A read-write octet string. Each byte represents a
DS0 in a T1 Port, starting with
1 from the right
most byte. The bundle is identified by the number
of the lowest DS0 of the bundle.
EQUGain
A read-write field having the value
g26db or g36db
(the default value).
Error Threshold
A read-write value ranging from
0 to 65535 (the
default value).
Severe Threshold
A read-write value ranging from
0 to 65535 (the
default value).
Alarm Threshold
A read-write value ranging from
1 to 9. The
default value is
3 . If port BER quality is below this
threshold for four seconds, a Port Error alarm will
be sent.
Fail Toggle Request
A read-write field having a value of
noToggle or
toggleIfPortFail (the default value).
OOSBit Pattern
A read-write field having a value of x7e , x1a , xd5 ,
or
x7f (the default value).
OOSA Signalling
A read-write field having a value of
space , mark ,
spaceMark (the default value), or markSpace .
OOSB Signalling
A read-write field having a value of space , mark ,
spaceMark (the default value), or markSpace .
OOSCD Signalling
A read-write field having a value of spaceSpace ,
markMark , spaceMark (the default value), or
markSpace .
Signal Version
A read-write field having the value inverted or
normal (the default value).
Fail Threshold
A read-write value from 1 to 9 . If port BER quality
is below this threshold for ten consecutive
seconds, a Port Down alarm will be sent. The
default value is
2 .