Specifications

ST1kT1PortApp T1M Port Configuration
SPECTRUM Enterprise Manager 130 of 194 Ascom TimePlex ST-1000
ST1kT1PortApp
This application provides T1M port configuration and status information.
The Icon Subviews menu for this application
provides access to the device specific views listed
below.
• T1M Port Configuration on Page 130
• T1M Port Statistics on Page 132
T1M Port Configuration
This view provides the following fields.
Port Address
A read-only value for the port address.
Start Mode
A read-write field having a value of automatic ,
erase , or off (the default value). erase will fail if
the port has any unremoved INLs or channels
that are not disconnected. Otherwise, it will
display the port's configuration to its default
values and erase any bundles, INLs, and
channels on the port.
Update
A read-only field having the value
loaded ,
updateReq , or resetReq (the default value).
Framing
A read-write field having the value sf , attESF , or
ansiESF (the default value).
Line Code
A read-write field having the value b8zs (the
default value),
ami , or zeroCodeSuppression .
DS1 Option
A read-write field that refers to the line build out
of the T1M port. The values are interpreted as
follows:
a (the default value) is 0 dB, b is -7.5 dB,
and
c is -15 dB.
DSX1 Distance
A read-write field having one of the following
values:
from0to133ft (the default value),
from134to266ft , from267to399ft ,
from400to533ft , from534to655ft , or
fccOptionA .