Specifications

ST1kBundleApp Bundle Configuration
SPECTRUM Enterprise Manager 122 of 194 Ascom TimePlex ST-1000
ST1kBundleApp
This application provides bundle configuration and status information.
The Icon Subviews menu for this application
provides access to the device specific views listed
below.
• Bundle Configuration on Page 122
• Bundle Status on Page 125
Bundle Configuration
This view provides the following fields.
Bundle Address
The bundle address. For BRM, bundle 1 is D-
channel; bundle 2 and 3 are B-channels.
Start Mode
A read-write value of either
automatic , erase , or
off (the default value). erase will fail if the
bundle has an unremoved INL or a channel that
is not disconnected. Otherwise, it will erase the
bundle configuration as well as the INL or
channel defined on the bundle. It will also erase
this bundle from the T1M, E1M, or BRM port
bundle map.
Update
A read-write value of
loaded , updateReq , or
resetReq (the default value).
Signaling
A read-only value of none (the default value), a ,
ab , or abcd .
Nuddle Pattern
A read-write value of space or mark (the default
value).
BWCntIdlePattern
A read-write value (listed below) of the bit pattern
output to the equipment, indicating bundle
availability.
a0-b0-c0-d0(16) a1-b0-c0-d0(1)
a0-b0-c0-d1(8) a1-b0-c0-d1(9)
a0-b0-c1-d0(4) a1-b0-c1-d0(5)
a0-b0-c1-d1(12) a1-b0-c1-d1(13)
a0-b1-c0-d0(2) a1-b1-c0-d0(3)
a0-b1-c0-d1(10) a1-b1-c0-d1(11)