Specifications

Frame Relay Views
Frame Relay Application
6-6
Miscellaneous Applications
LL Index Identifies the lower layer in cases where the lower layer may be
something other than the physical layer. For example, if Frame
Relay is running over an ATM virtual circuit, the LL Index
identifies the ATM virtual circuit.
Circuit (or Number) Circuit number representing this interface.
Mngmnt Type Indicates which Data Link Connection Management Scheme is
active, and implies what DLCMI it uses. Possible management
types are None, Lmi, T1617b, Annexa, Limswitch, and
Annexaswitch.
Status Indicates the state of the interface. Possible statuses are Running
(indicating LMI was successful or there is no DLCMI and the
system is operational)
Address Address format in use on the frame relay interface. Possible
addresses are q921, q922march90, q922november90, and q922.
Address Length Address length in octets. In the case of q922 format, this indicates
the entire length of the address, including the control portion.
Possible address lengths are Twobyte, Threebyte, and Fourbyte.
Dlci Frame relay “address” of the virtual circuit.
Delete Indication to delete this frame relay interface.
State State of this virtual circuit. Possible states are Invalid, Active,
Inactive, Xoff and Control.
State Set Enables you to set the state of a virtual circuit. Possible settings are
Invalid, Active, and Inactive.
Multicast Indicates whether this Dlcmi is used for multicast or single
destination.
Interface Dlcmi Table View (Continued)