Specifications

9032563 E1 FDDI Application
1-9
FDDI App Views
Connect Generates a Connect signal to ECM to begin a connection sequence.
Disconnect Generates a Disconnect signal to ECM.
Path-Test Initiates a station Path_Test.
Self-Test Initiates a station Self_Test.
Disable-a Disables the A port if the A port mode is peer.
Disable-b Disables the B port if the B port mode is peer.
Disable-m Disables all M ports.
MAC Table This table provides a list of the MAC entries. Double-clicking on any entry in
the MAC Table accesses a MAC Table View, which allows you to modify the
selected entry. The MAC Table and its corresponding entry-specific views
provide the information described below. (Note that you must scroll the MAC
Table window in order to see all entries.)
SMT Index The value of the SMT index associated with this MAC.
MAC Index The index variable for uniquely identifying this MAC.
MAC If Index The interface index number corresponding to this MAC. If none is applicable,
the MAC If Index value is zero.
MAC Path Indicates which FDDI ring the device’s MAC is currently attached to. The
MAC Path options are Isolated, Local, Secondary, Primary, Concatenated
and Thru. These are defined below.
Isolated The MAC has no connection to the ring or other concentrator ports.
Local The MAC is connected to one or more nodes but is not connected to the dual
ring.
SMT Device Configuration View (Continued)