Switch User Manual

SmartSwitch 1800 Voice Conﬁguration

12-8 Conﬁguring Voice Ports

Conﬁguring Voice Ports

You can use the Voice ConÞguration window to conÞgure a voice port. To access

the window:

1. Click mouse button 3 on the voice port of interest to display the Port Menu.

2. Drag down to Voice Conﬁguration, and release. The Voice Conﬁguration

window, Figure 12-3, will appear.

Figure 12-3. Voice ConÞguration

You can conÞgure the following voice port parameters:

DTMF

This parameter enables, disables, or speciÞes a time span over which Dual Tone

Multi Frequency (DTMF) tones will be regenerated. (DTMF tones are the ÒbeepsÓ

usually heard when dialing a touch-tone telephone.) Enter 0 to disable DTMF: the

NOTE

After you have made system-level changes (such as conÞguring Voice Parameters, you

must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through

console management via the [F7] command.