Switch User Manual

Conﬁguring IPX Static Routes 10-13

IPX Interface Conﬁguration

Figure 10-4. The IPX Static Route ConÞguration Window

The list box at the top of the window displays the IPX static routes that have

already been conÞgured; the Þelds and buttons in the lower portion of the

window allow you to add new entries, and modify or delete existing ones.

Following is a description of the IPX Static Route parameters that you can

conÞgure:

Circuit Index

This number is the unique identiÞer of the circuit used to reach the Þrst hop in the

static route.

Network Number

Enter the IPX network number of the routeÕs destination.

Router Address

Enter the hex value of the node address of the router that will forward a packet

when this route is used. If NovellÕs IPXWAN protocol is used on the interface (as

conÞgured in the IPX Interface ConÞguration window; see page 10-2), this Þeld is

ignored.