Specifications

9032285 E1

5-5

Application View

Netlink Application

This section describes the Netlink Application supported by the device. The

model type for this application is FRXApp. The following views are available

from the Icon Subviews menu for this application:

Netlink RLP ConfigurationView

This view displays the following information for each RLP on the node:

RLP

The RLP number on the node.

LIC 1

The Type of Line Interface card in the first position.

LIC 2

The Type of Line Interface card in the first position.

Memory

The amount of memory installed on this RLP.

Status

The current state of this RLP.

Protocols

The protocols configured on this RLP. This is an octet string where each octet

represents a protocol type. The size of this is the maximum number of

protocols allowed on an RLP.

The protocol types are defined as:

• 00 = none

• 01 = X.25

• 02 = Frame Relay

• 03 = Async

• 04 = SDLC

• 05 = BSC Interactive

• 07 = IP

• 08 = SNMP

• 09 = RIP

• 0A = LLC2

• 0B = Trunk

• 0C = IPX

• 0D = Config

• 0E = LLC2-R

• 0F = IP-R

• 10 = NVSP

• 11 = Bridge