Specifications

Event and Alarm Messages
FRX4000 and FRX6000 Events and Alarms
FRX4000 and FRX6000
4-6 Management Module Guide
CsEvFormat/Event019d0204
{d "%w- %d %m-, %Y - %T"} -
The DC output for the first power supply
on device, {m} of type {t} is {T
SMC_Power3}. Trap severity is {T
SMC_Severity 1}.
CsPCause/Prob019d0204
PROBABLE CAUSE: The DC output
of the unit’s first power supply has
changed.
RECOMMENDED ACTIONS: 1)
Refer to Event log for current DC
output state. If DC output state is
bad, 2) Check first power supply unit
on device. 3) Check power source to
device.
CsEvFormat/Event019d0205
{d "%w- %d %m-, %Y - %T"} -
The DC output for the second power
supply on device, {m} of type {t} is {T
SMC_Power 3}. Trap severity is {T
SMC_Severity 1}.
CsPCause/Prob019d0205
PROBABLE CAUSE: The DC output
of the unit’s second power supply has
changed.
RECOMMENDED ACTIONS: 1)
Refer to Event log for current DC
output state. If DC output state is
bad, 2) Check second power supply
unit on device. 3) Check power source
to the device.
CsEvFormat/Event019d0211
{d "%w- %d %m-, %Y - %T"} -
The optical bypass for FDDI port {I 4}
has become {T SMC_FddiSB 3} for device
{m} of type {t}. Trap severity is {T
SMC_Severity 1}.
CsPCause/Prob019d0211
PROBABLE CAUSE: The FDDI port
optical bypass has changed.
RECOMMENDED ACTIONS: 1)
Refer to Event log for current optical
bypass port state. 2) Check the optical
bypass port.
CsEvFormat/Event019d0212
{d "%w- %d %m-, %Y - %T"} -
The fuse to the optical bypass for the
FDDI port {I 4} is {T SMC_FddiOBS 3}
for device {m} of type {t}. Trap severity is
{T SMC_Severity 1}.
CsPCause/Prob019d0212
PROBABLE CAUSE: The state of the
FDDI port optical bypass fuse has
changed.
RECOMMENDED ACTIONS: 1)Refer
to Event log for current optical bypass
fuse state.
Table 4-1. Events and Alarms (Continued)
Message in the Event Log
Alarm View Probable Cause
Message