Specifications

Configuration Views
Interface Configuration View
FRX4000 and FRX6000
3-4 Management Module Guide
Interface Configuration View
To access this view from the Interface Device view, double-click the Interface
Type Label of the icon, or do the following:
1. Highlight the Interface icon.
2. From the Icon Subviews menu, select IF Configuration.
You can also access this view from the Interface Configuration Table of the
Device Configuration view. Double-click any of the fields within the table.
This view provides the following information:
Operation Status
Displays the current operating status of the port. Possible values are On, Off,
or Test.
Admin Status
Provides a button that allows you to change the current administrative state
of the port. Possible values are On, Off, or Testing.
Last Change
Displays the time the last change to the device configuration occurred.
Network Name/Address
Displays the network name and address connected to this interface.
Physical Address
Displays the physical (MAC) address of the port.
Bandwidth
Displays the estimated bandwidth of the interface measured in bits per
second. For interfaces that do not vary in bandwidth or for which no accurate
estimate can be made, a nominal bandwidth shows.
Packet Size
Displays the size of the packets being transmitted or received.
Queue Length
Displays the number of packets in the queue.