Specifications

9032285 E1
3-3
Configuration Views
Device Configuration View
Interface Configuration Table
The Interface Configuration Table provides the following configuration
information:
Index
Displays the number of the interface.
Description
Describes the interface.
Type
Displays the type of hardware interface for the port.
Bandwidth
Displays the estimated bandwidth of the interface, measured in bits per
second. For interfaces that do not vary in bandwidth or for which no accurate
estimate can be made, a nominal bandwidth displays.
Physical Address
Displays the Ethernet (MAC) address of the port.
Max Frame Size
Displays the maximum frame size.
Operation Status
Displays the current operational state of this port. Possible values are On, Off
Test.
Admin Status
Displays the current administrative state of the port. Possible values are On,
Off, or Test.
Last Change
Displays the time the last change to the device configuration occurred.
Queue Length
Displays the number of packets in the queue.
Packet Size
Displays the largest packet, measured in octets, that can be transmitted or
received by the port.
Double-click any of the fields within this table to open the Interface
Configuration View described below.