Specifications

Port Configuration-CSIIfPort View
Configuration Views SMARTMIM-216
3-4 Management Module Guide
Phy Address
Displays the physical (MAC) address of the interface or port.
Max Frame Size
Displays the maximum frame size for the interface or port.
Oper Status
Displays the current operational state of this interface or port (Up, Down, or
Testing).
Port Configuration-CSIIfPort View
This view provides information on the configuration and operating status of
the device’s interfaces or ports. You can access this view from the Interface
Device view in two ways:
• Double-click the administrative status label.
• Highlight the Interface icon and from the Icon Subviews menu, select
Configuration.
Interface Index
Displays the numerical value identifying the interface or port.
Interface Type
Displays the type of interfaces.
Operation Status
Displays the current operating status of the port (On, Off, or Test).
PPP Point to Point Protocol
SFTWARLPBK Software Loopback
CLNPoverIP Connectionless Network Protocol over IP
Enet3MB Ethernet 3 Mbps
XNSoverIP Xerox Network Service Protocol over IP
SLIP Generic Serial Line IP
ULTRA ULTRA Technologies
T-3 T3 link
SMDS Switched Multimegabit Data Service
FrameRelay T1 Frame relay
Table 3-1. Interface Types (Continued)
Type Description