Specifications

9032248 E1 Device Views
2-9
Interface Device View
Gauge Control Panel
Gauge Mode
This area allows you to select the type of information shown on the Gauge
label of the Interface icon: Rates, Totals, or Percentages. The Percentages
selection displays the percentage of the selected interface compared to the rest
of the interfaces.
The color displayed on the Gauge label depends upon the particular mode and
statistical attribute selected. Table 2-5 and Table 2-6 list the attributes and
their corresponding colors for the Totals mode and Rates mode, respectively.
Table 2-5. Totals Mode: Attributes and Corresponding Color
Selected Attribute Color
Errors Orange
In Packets Blue
Out Packets Blue
In Octets Green
Out Octets Green
Discards Tan
Forwarded Purple
Host Bound Yellow
Transmitted White
Filtered Gray
Table 2-6. Rates Mode: Attributes and Corresponding Color
Selected Attribute Color
Load Green
Load In Green
Load Out Green
Packet Rate Blue
In Packet Rate Blue
Out Packet Rate Blue
%Discard Tan
%Filtered Gray
%Forwarded Violet
%Host Bound Yellow
%Error Orange
%Transmitted White