Specifications

Interface Device View
Interface Icon
Device Views SMARTMIM-216
2-4 Management Module Guide
Interface Icon Subviews Menu
Table 2-1 describes the Interface icon’s device-specific subviews menu
selections. For information on accessing device-specific subviews menus, see
Chapter 1, Introduction.
Interface Label
This label displays the interface (port) number.
Administrative Status Label
This label displays the status of this interface. Double-click this label to open
the Port Configuration - CSIIfPort view described on page 3-4. Table 2-2 and
Table 2-3 list the possible states relative to the application selected (Physical
or Bridging). The default application for this view is Physical (MIB-II). To
select the application to be displayed, click the Filter menu button in the
Interface Options panel. (Refer to the Interface Options Panel described on
page 2-7 for more information on the Filter menu button.)
Table 2-1. Interface Icon Subviews Menu
Menu Selection Description
Configuration Opens the Device Configuration view described
on page 3-2.
Secondary Address Panel Opens the Secondary Address Panel view
described on page 2-7.
Model Information Opens the Model Information view described in
the Operator’s Reference.
Table 2-2. Administrative Status for the Physical or MIB II Application
Color Status Description
Green ON Port is operational.
Blue OFF Port is off.
Red TST Port is in the test mode.