Specifications

SmartSwitch Router 2100 Getting Started Guide 47
Chapter 4: Installing and Starting Cabletron CoreWatch
Note:
If you installed the program in a startup folder other than Programs →
→→
→
CoreWatch, select that folder from the Start menu and then select CoreWatch.
2. Type the name or IP address and community string for the SSR. If you do not know
this information, see your network administrator.
3. Click OK.
Alternately, you can start CoreWatch by selecting the Start menu, choosing Run..., and
entering the following command in the Run dialog box:
where <ipaddr> is the IP address of the SSR and <community-string> is the SSR’s
community string. If you do not know this information, see your network administrator.
Starting CoreWatch from within SPECTRUM Enterprise Manager
Cabletron SPECTRUM Enterprise Manager is an object-oriented network management
platform. SPECTRUM, which is available on Solaris and Windows NT, provides a suite of
bundled applications as well as additional optional applications. The SSR is modeled in
SPECTRUM using the SmartSwRtr model type. The SSR can be Auto-Discovered or
manually created in a SPECTRUM Topology View and then copied to an Organization
and/or Location View.
To start CoreWatch from within SPECTRUM:
1. Start SPECTRUM.
2. If you know the topology location for your model, proceed to that location.
Otherwise, open the Find View by choosing the View menu, selecting New View, and
then selecting Find. Select Model-Type Name and enter the SmartSwRtr command to
display all the SmartSwRtr models or select Network Address to display a particular
model.
3. Bring up the menu for the SmartSwRtr model and select CoreWatch.
This starts CoreWatch using the SmartSwRtr model's network address and community
name.
C:\Program Files\Cabletron\BIN\CoreWatch -a
<IPaddr>
-r
<community-string>