Specifications
Table Of Contents
- Notices
- Contents
- Preface
- Features Overview
- Hardware Installation
- Software Installation and Setup
- Powering On and Booting the Software
- Starting the Command Line Interface
- Setting Basic System Information
- Setting Up SNMP Community Strings
- Setting Up Passwords
- Setting the DNS Domain Name and Address
- Setting SYSLOG Parameters
- Loading System Image Software
- Loading Boot PROM Software
- Upgrading the VFS
- Activating Configuration Changes and Saving the Configuration File
- Installing and Starting Cabletron CoreWatch
- Troubleshooting
- Technical Support
- Index
SmartSwitch Router 2100 Getting Started Guide 15
Chapter 2
Hardware
Installation
This chapter provides hardware installation information and procedures in the following
sections:
• Safety considerations
• Hardware specifications
• Installing the hardware
If the hardware is already installed and you are ready to install the software and perform
basic system configuration, see Chapter 3, “Software Installation and Setup” on page 23.
Safety Considerations
Read the following safety warnings and product cautions to avoid personal injury or
product damage.
Preventing Injury
Observe the following safety warnings to prevent accidental injury when working with
the SSR 2100 hardware.
• To avoid back strain, be careful when lifting the SSR 2100 out of the shipping box.
• Never attempt to rack mount the SSR 2100 unaided. Ask an assistant to help you hold
the SSR 2100.