Specifications

Table Of Contents
Chapter 13: filters Commands
13 - 6 SSR Command Line Interface Reference Manual
filters add static-entry
Purpose
Applies a static entry.
Format
filters add static-entry name
<name>
restriction allow|disallow|force source-mac
<MACaddr>
dest-mac
<MACaddr>
vlan
<VLAN-num>
in-port-list
<port-list>
out-port-list
<port-list>
Mode
Configure
Description
The
filters
add static-entry
command allows, disallows, or forces traffic to go
to a set of destination ports based on a frame’s source MAC address (
source-mac
),
destination MAC address (
dest-mac
), or a flow (specified using both a source MAC
address and a destination MAC address).
Parameters
name
<name>
Specifies the name of the static-entry filter.
restriction allow|disallow|force
Specifies the forwarding behavior of the stat-
ic entry, which can be one of the following
keywords:
allow
Allows packets to go to the set of
ports specified by
out-port-list
.
disallow
Prohibits packets from going
to the set of ports specified by
out-port-
list
.
force
Forces packets to go to the set of
ports specified by
out-port-list
,
despite any port locks in effect on the ports.
source-mac
<MACaddr>
Specifies the source MAC address. Use this
option for source or flow static entries.