Specifications
Table Of Contents
- Title Page
- Notice
- Contents
- acl Commands
- acl-edit Commands
- aging Commands
- arp Commands
- cli Commands
- configure Command
- copy Command
- dvmrp Commands
- enable Command
- erase Command
- exit Command
- file Commands
- filters Commands
- http Commands
- igmp Commands
- interface Commands
- ip Commands
- ip-router Commands
- Command Summary
- ip-router authentication add key-chain
- ip-router authentication create key-chain
- ip-router global add
- ip-router global set
- ip-router global set trace-options
- ip-router global set trace-state
- ip-router global use provided_config
- ip-router kernel trace
- ip-router policy add filter
- ip-router policy add optional-attributes-list
- ip-router policy aggr-gen destination
- ip-router policy create aggregate-export-source
- ip-router policy create aggr-gen-dest
- ip-router policy create aggr-gen-source
- ip-router policy create aspath-export-source
- ip-router policy create bgp-export-destination
- ip-router policy create bgp-export-source
- ip-router policy create bgp-import-source
- ip-router policy create direct-export-source
- ip-router policy create filter
- ip-router policy create optional-attributes-list
- ip-router policy create ospf-export-destination
- ip-router policy create ospf-export-source
- ip-router policy create ospf-import-source
- ip-router policy create rip-export-destination
- ip-router policy create rip-export-source
- ip-router policy create rip-import-source
- ip-router policy create static-export-source
- ip-router policy create tag-export-source
- ip-router policy export destination
- ip-router policy import source
- ip-router policy redistribute
- ip-router show configuration file
- ip-router show state
- ipx Commands
- l2-tables Commands
- logout Command
- multicast Commands
- mtrace Command
- negate Command
- no Command
- ospf Commands
- Command Summary
- ospf add interface
- ospf add nbma-neighbor
- ospf add network
- ospf add stub-host
- ospf add virtual-link
- ospf create area
- ospf create-monitor
- ospf monitor
- ospf set area
- ospf set ase-defaults
- ospf set export-interval
- ospf set export-limit
- ospf set interface
- ospf set monitor-auth-method
- ospf set trace-options
- ospf set virtual-link
- ospf show
- ospf start|stop
- ping Command
- port Commands
- qos Commands
- reboot Command
- rip Commands
- save Command
- show Command
- snmp Commands
- statistics Commands
- stp Commands
- system Commands
- Command Summary
- system image add
- system image choose
- system image delete
- system image list
- system promimage upgrade
- system set bootprom
- system set contact
- system set date
- system set dns
- system set location
- system set name
- system set password
- system set poweron-selftest
- system set syslog
- system set terminal
- system show
- traceroute Command
- vlan Commands
Chapter 8: dvmrp Commands
SSR Command Line Interface Reference Manual 8 - 9
dvmrp show routes
Purpose
Display DVMRP unicast routing table.
Format
dvmrp show routes host
<IPaddr>
|interface
<IPaddr>
|
net
<netaddr>
|router
<IPaddr>
Mode
Enable
Description
The
dvmrp
show
routes
command displays the contents of DVMRP unicast routing
table.
DVMRP routes show the topology information for the internet multicasting sites. It is
independent of IP unicast routing table or protocol. In this table, the information is
presented about a address prefix (in form of network-address/network-mask length),
the interface and the uplink router through which this subnet can be reached. This table
also shows information about any routers/interfaces which consider this router as their
uplink (that is, those routers which depend on this router if traffic were to originate
from this subnet).
Note:
This command is different from
multicast
show
mroutes
. This com-
mand can search on basis of subnet. It can search on basis of those routes
whose parent is a particular interface and/or a particular router.
Parameters
host
<IPaddr>
Displays the route to the specified uplink host address.
interface
<IPaddr>
Displays the interface address of the specified uplink host.
net
<netaddr>
Displays the route to the specified network.
router
<IPaddr>
Displays the route to the specified router.
Restrictions
None.