Specifications
Table Of Contents
- Title Page
- Notice
- Contents
- acl Commands
- acl-edit Commands
- aging Commands
- arp Commands
- cli Commands
- configure Command
- copy Command
- dvmrp Commands
- enable Command
- erase Command
- exit Command
- file Commands
- filters Commands
- http Commands
- igmp Commands
- interface Commands
- ip Commands
- ip-router Commands
- Command Summary
- ip-router authentication add key-chain
- ip-router authentication create key-chain
- ip-router global add
- ip-router global set
- ip-router global set trace-options
- ip-router global set trace-state
- ip-router global use provided_config
- ip-router kernel trace
- ip-router policy add filter
- ip-router policy add optional-attributes-list
- ip-router policy aggr-gen destination
- ip-router policy create aggregate-export-source
- ip-router policy create aggr-gen-dest
- ip-router policy create aggr-gen-source
- ip-router policy create aspath-export-source
- ip-router policy create bgp-export-destination
- ip-router policy create bgp-export-source
- ip-router policy create bgp-import-source
- ip-router policy create direct-export-source
- ip-router policy create filter
- ip-router policy create optional-attributes-list
- ip-router policy create ospf-export-destination
- ip-router policy create ospf-export-source
- ip-router policy create ospf-import-source
- ip-router policy create rip-export-destination
- ip-router policy create rip-export-source
- ip-router policy create rip-import-source
- ip-router policy create static-export-source
- ip-router policy create tag-export-source
- ip-router policy export destination
- ip-router policy import source
- ip-router policy redistribute
- ip-router show configuration file
- ip-router show state
- ipx Commands
- l2-tables Commands
- logout Command
- multicast Commands
- mtrace Command
- negate Command
- no Command
- ospf Commands
- Command Summary
- ospf add interface
- ospf add nbma-neighbor
- ospf add network
- ospf add stub-host
- ospf add virtual-link
- ospf create area
- ospf create-monitor
- ospf monitor
- ospf set area
- ospf set ase-defaults
- ospf set export-interval
- ospf set export-limit
- ospf set interface
- ospf set monitor-auth-method
- ospf set trace-options
- ospf set virtual-link
- ospf show
- ospf start|stop
- ping Command
- port Commands
- qos Commands
- reboot Command
- rip Commands
- save Command
- show Command
- snmp Commands
- statistics Commands
- stp Commands
- system Commands
- Command Summary
- system image add
- system image choose
- system image delete
- system image list
- system promimage upgrade
- system set bootprom
- system set contact
- system set date
- system set dns
- system set location
- system set name
- system set password
- system set poweron-selftest
- system set syslog
- system set terminal
- system show
- traceroute Command
- vlan Commands
Chapter 8: dvmrp Commands
SSR Command Line Interface Reference Manual 8 - 7
dvmrp show interface
Purpose
Display DVMRP interfaces.
Format
dvmrp show interface [
<IPaddr>
]
Mode
Enable
Description
The
dvmrp
show
interface
command displays information about interfaces running
DVMRP.
Parameters
IPaddr>
Displays DVMRP information for the specified interface.
Restrictions
None.
Examples
Here is an example of the
dvmrp
show
interface
command.
ssr# dvmrp show interface
Address: 172.1.1.10 Subnet: 172.1.1/24 Met: 1 Thr: 1
Name : mls15 State: Up Querier Leaf Igmp Dvmrp
Address: 207.135.89.64 Subnet: 207.135.89.0/25 Met: 1 Thr: 1
Name : company State: Up Querier Leaf Igmp Dvmrp
Address: 10.135.89.10 Subnet: 10.135.89.0/25 Met: 1 Thr: 1
Name : test State: Up Querier Igmp Dvmrp
Peer : 10.135.89.67 Flags: 0xe Version: 3.255
Address: 207.135.122.11 Subnet: 207.135.122.8/29 Met: 1 Thr: 1
Name : mbone State: Up Igmp Dvmrp
Peer : 207.135.122.10 Flags: 0xe Version: 3.255
Address: 10.40.1.10 Subnet: 10.40.1/24 Met: 1 Thr: 1
Name : downstream State: Up Dvmrp
Peer : 10.40.1.1 Flags: 0xf Version: 3.255