Specifications

ManualsBrandsCabletron Systems ManualsComputer equipmentSmartSwitch Router

Table Of Contents

Title Page
Notice
Contents
acl Commands
- Command Summary
- acl apply interface
- acl apply service
- acl permit|deny icmp
- acl permit|deny igmp
- acl permit|deny ip
- acl permit|deny ipx
- acl permit|deny ipxrip
- acl permit|deny ipxsap
- acl permit|deny tcp
- acl permit|deny udp
acl-edit Commands
- Command Summary
- acl-edit
- acl permit|deny
- delete
- exit
- move
- save
- show
aging Commands
- Command Summary
- aging l2 disable
- aging l2 set aging-timeout
- aging l2 show status
arp Commands
- Command Summary
- arp add
- arp clear
- arp show all
cli Commands
- Command Summary
- cli set command completion
- cli set history
- cli set terminal
- cli show history
- cli show terminal
configure Command
- Purpose
- Format
- Mode
- Description
- Parameters
  - None.
- Restrictions
copy Command
- Purpose
- Format
- Mode
- Description
- Parameters
- Restrictions
- Examples
dvmrp Commands
- Command Summary
- dvmrp create tunnel
- dvmrp enable no-pruning
- dvmrp enable interface
- dvmrp set interface
- dvmrp show interface
- dvmrp show routes
- dvmrp start
enable Command
- Format
- Mode
- Description
- Parameters
- Restrictions
erase Command
- Format
- Mode
- Description
- Parameters
- Restrictions
exit Command
- Format
- Mode
- Parameters
- Restrictions
file Commands
- Command Summary
- file delete
- file dir
- file type
filters Commands
- Command Summary
- filters add address-filter
- filters add port-address-lock
- filters add secure-port
- filters add static-entry
- filters show address-filter
- filters show port-address-lock
- filters show secure-port
- filters show static-entry
http Commands
- Command Summary
- http disable authentication
- http show
- http stop
igmp Commands
- Command Summary
- igmp enable interface
- igmp set interface
- igmp set queryinterval
- igmp set responsetime
- igmp show interfaces
- igmp show memberships
- igmp show timers
interface Commands
- Command Summary
- interface add ip
- interface create ip
- interface create ipx
- interface show ip
- interface show ipx
ip Commands
- Command Summary
- ip add route
- ip helper-address
- ip show connections
- ip show helper-address
- ip show interfaces
- ip show routes
ip-router Commands
- Command Summary
- ip-router authentication add key-chain
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router authentication create key-chain
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router global add
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router global set
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router global set trace-options
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router global set trace-state
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router global use provided_config
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router kernel trace
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy add filter
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy add optional-attributes-list
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy aggr-gen destination
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create aggregate-export-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create aggr-gen-dest
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create aggr-gen-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create aspath-export-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create bgp-export-destination
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create bgp-export-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create bgp-import-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create direct-export-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create filter
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create optional-attributes-list
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create ospf-export-destination
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create ospf-export-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create ospf-import-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create rip-export-destination
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create rip-export-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create rip-import-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create static-export-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy create tag-export-source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy export destination
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy import source
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router policy redistribute
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
  - Examples
- ip-router show configuration file
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
- ip-router show state
  - Purpose
  - Format
  - Mode
  - Parameters
  - Restrictions
ipx Commands
- Command Summary
- ipx add route
- ipx add sap
- ipx find rip
- ipx find sap
- ipx show interfaces
- ipx show tables
l2-tables Commands
- Command Summary
- l2-tables show all-flows
- l2-tables show all-macs
- l2-tables show bridge-management
- l2-tables show igmp-mcast-registrations
- l2-tables show mac
- l2-tables show mac-table-stats
- l2-tables show port-macs
- l2-tables show vlan-igmp-status
logout Command
- Format
- Mode
- Description
- Parameters
- Restrictions
multicast Commands
- Command Summary
- multicast show interface
- multicast show mroutes
mtrace Command
- Purpose
- Format
- Mode
- Description
- Parameters
- Restrictions
- Examples
negate Command
- Format
- Mode
- Description
- Parameters
- Restrictions
- Examples
no Command
- Format
- Mode
- Description
- Parameters
- Restrictions
- Examples
ospf Commands
- Command Summary
- ospf add interface
- ospf add nbma-neighbor
- ospf add network
- ospf add stub-host
- ospf add virtual-link
- ospf create area
- ospf create-monitor
- ospf monitor
- ospf set area
- ospf set ase-defaults
- ospf set export-interval
- ospf set export-limit
- ospf set interface
- ospf set monitor-auth-method
- ospf set trace-options
- ospf set virtual-link
- ospf show
- ospf start|stop
ping Command
- Format
- Mode
- Description
- Parameters
- Restrictions
port Commands
- Command Summary
- port disable
- port flow-bridging
- port mirroring
- port set
- port show bridging-status
- port show port-status
- port show stp-info
- port show vlan-info
- port show mirroring-status
qos Commands
- Flows
- Precedence
- Queuing Policies
- Command Summary
- qos precedence ip
- qos precedence ipx
- qos set ip
- qos set ipx
- qos set l2
- qos set queuing-policy
- qos set weighted-fair
- qos show ip
- qos show ipx
- qos show l2
- qos show
reboot Command
- Format
- Mode
- Parameters
- Restrictions
rip Commands
- Command Summary
- rip add
- rip set broadcast-state
- rip set check-zero
- rip set default-metric
- rip set interface
- rip set preference
- rip show
- rip start
- rip stop
- rip trace
save Command
- Format
- Mode
- Description
- Parameters
- Restrictions
show Command
- Purpose
- Format
- Mode
- Description
- Parameters
- Restrictions
- Examples
snmp Commands
- Command Summary
- snmp disable trap
- snmp set chassis-id
- snmp set community
- snmp set target
- snmp show
- snmp stop
statistics Commands
- Command Summary
- statistics clear
- statistics show
stp Commands
- Command Summary
- stp enable port
- stp set bridging
- stp set port
- stp show bridging-info
system Commands
- Command Summary
- system image add
- system image choose
- system image delete
- system image list
- system promimage upgrade
- system set bootprom
- system set contact
- system set date
- system set dns
- system set location
- system set name
- system set password
- system set poweron-selftest
- system set syslog
- system set terminal
- system show
traceroute Command
- Format
- Mode
- Description
- Parameters
- Restrictions
- Example
vlan Commands
- Command Summary
- vlan add ports
- vlan create
- vlan list
- vlan make

Chapter 39: vlan Commands

SSR Command Line Interface Reference Manual 39 - 5

vlan list

Purpose

List all VLANs active on the SSR.

Format

vlan list

Mode

User or Enable

Description

The

vlan

list

command lists all the VLANs that have been configured on the SSR.

Parameters

None.

Restrictions

None.