Manualshelf

Specifications

ManualsBrandsCabletron Systems ManualsComputer equipmentSmartSwitch Router
351352353354355356357358359360
Table Of Contents
Chapter 37: system Commands
37 - 20 SSR Command Line Interface Reference Manual
system show
Purpose
Show system information.
Format
system show
<system-parm>
Mode
Enable
Description
The
system
show
command
shows the active settings for the following system
parameters:
• Active configuration (CLI configuration of the running system)
• Size of the Syslog message buffer
• Contact information for the SSR’ administrator (if you set one using the
system
set
contact
command)
• Current system time and date (if you set them using
system
set
date
command)
• Time that has elapsed since the SSR was rebooted and the system time and date
when the last reboot occurred
• IP address(es) and domain name of DNS servers the SSR can use (if you set them
using
system
set
dns
command)
• Hardware information
• Location of the SSR (if you set one using the
system
set
location
command)
• System name of the SSR (if you set one using the
system
set
name
command)
• IP address or hostname of SYSLOG server and the message level (if you set these
parameters using the
system
set
syslog
command)
• Configuration changes in the scratchpad that are waiting for activation
• Software version running on the Control Module
• Last five Telnet connections to the SSR