Specifications

Chapter 26: ospf Commands
26 - 18 SSR Command Line Interface Reference Manual
priority
<num>
A number between 0 and 255 specifying the pri-
ority for becoming the designated router on this
interface. When two routers attached to a net-
work both attempt to become the designated
router, the one with the higher priority wins. A
router whose router priority is set to 0 is ineligi-
ble to become designated router. Specify a
number from 0 – 255. The default is 0.
hello-interval
<num>
The length of time, in seconds, between hello
packets that the router sends on this interface.
Specify a number from 0 – 255. The default is
10 for broadcast interfaces and 30 for point-to-
point and other non-broadcast interfaces.
router-dead-interval
<num>
The number of seconds not hearing a router's
Hello packets before the router's neighbors will
declare it down. Specify a number from 0 – 255.
The default is 4 times the value of the hello in-
terval.
poll-interval
<num>
Before adjacency is established with a neigh-
bor, OSPF packets are sent periodically at the
specified poll interval. Specify a number equal
to or greater than 1. The default value for this
option is 120 seconds.
key-chain
<num-or-string>
The identifier of the key-chain containing the
authentication keys.
Restrictions
None.