Specifications

Chapter 26: ospf Commands
SSR Command Line Interface Reference Manual 26 - 11
ported as the number of intra-area routes, inter-area routes, and AS external
data base entries.
errors
Shows the various error conditions which can occur between OSPF routing
neighbors and the number of occurrences for each.
next-hop-list
Shows information about all valid next hops mostly derived from the SPF cal-
culation.
interfaces
Shows information about all interfaces configured for OSPF. Information re-
ported includes the area, interface IP address, interface type, interface state,
cost, priority, and the IP address of the Designated Router and Backup Des-
ignated Router for the network.
neighbors
Shows information about all OSPF routing neighbors. Information reported
includes the area, local interface address, router ID, neighbor IP address,
state, and mode.
lsdb
Displays the link-state database (except for ASEs). This table describes the
routers and networks making up the AS. If the display-retransmit-list option
is specified, the retransmit list of neighbors held by this lsdb structure will
also be printed.
display-retransmit-list
– Displays the retransmit list from the link
state database.
routes
Displays the OSPF routing table. This table reports the AS border routes, area
border routes, summary AS border routes, networks, summary networks and
AS external networks currently managed via OSPF.
type all
– Shows all OSPF routes.
type asbrs-in-area
– Shows routes to AS boundary routers in this area.
type area-border-routers
– Shows routes to area border routers for this
area.
type asbrs-other-areas
– Shows summary routes to AS boundary rout-
ers in other areas.