Specifications

About This Manual
xviii SSR Command Line Interface Reference Manual
IPX
network.node
address
An IPX network and node address of
the form <netaddr>.<macaddr> where
<netaddr> is the network address of a
host and <macaddr> is the node or
MAC address of the IPX host. For
some commands, if the node address is
not given, the node address is assumed
to be a wildcard.
a1b2c3d4.0820a1:f3:38:11
or aa89f383
IPX SAP
server name
An alphanumeric string representing a
valid IPX SAP server name where the
following characters are illegal: “*./
:;<=>?[]\|
server1
MAC address A MAC address specified in one of two
forms: xx:xx:xx:xx:xx:xx or
xxxxxx:xxxxxx
08:00:50:1a:2b:c3 or
080050:1a2bc3
number An integer number 100
numerical
range
A number or a range of numbers 5 or 7-10
port A single port et.1.4 or gi.2.1
port list A list of one or more ports. To specify a
range of ports within a module,
describe the range in parenthesis. You
can also specify non-consecutive ports
by using commas to separate them. The
wildcard character (*) can also be used
to specify all modules or all ports
within a module
et.1.(3-8) or et.1.(1,3,5) or
gi.2.*
slot number A list of one or more occupied slots in
the SSR
1 or 7
Data Type Descripton Example