Specifications
Table Of Contents
- Title Page
- Notice
- Contents
- acl Commands
- acl-edit Commands
- aging Commands
- arp Commands
- cli Commands
- configure Command
- copy Command
- dvmrp Commands
- enable Command
- erase Command
- exit Command
- file Commands
- filters Commands
- http Commands
- igmp Commands
- interface Commands
- ip Commands
- ip-router Commands
- Command Summary
- ip-router authentication add key-chain
- ip-router authentication create key-chain
- ip-router global add
- ip-router global set
- ip-router global set trace-options
- ip-router global set trace-state
- ip-router global use provided_config
- ip-router kernel trace
- ip-router policy add filter
- ip-router policy add optional-attributes-list
- ip-router policy aggr-gen destination
- ip-router policy create aggregate-export-source
- ip-router policy create aggr-gen-dest
- ip-router policy create aggr-gen-source
- ip-router policy create aspath-export-source
- ip-router policy create bgp-export-destination
- ip-router policy create bgp-export-source
- ip-router policy create bgp-import-source
- ip-router policy create direct-export-source
- ip-router policy create filter
- ip-router policy create optional-attributes-list
- ip-router policy create ospf-export-destination
- ip-router policy create ospf-export-source
- ip-router policy create ospf-import-source
- ip-router policy create rip-export-destination
- ip-router policy create rip-export-source
- ip-router policy create rip-import-source
- ip-router policy create static-export-source
- ip-router policy create tag-export-source
- ip-router policy export destination
- ip-router policy import source
- ip-router policy redistribute
- ip-router show configuration file
- ip-router show state
- ipx Commands
- l2-tables Commands
- logout Command
- multicast Commands
- mtrace Command
- negate Command
- no Command
- ospf Commands
- Command Summary
- ospf add interface
- ospf add nbma-neighbor
- ospf add network
- ospf add stub-host
- ospf add virtual-link
- ospf create area
- ospf create-monitor
- ospf monitor
- ospf set area
- ospf set ase-defaults
- ospf set export-interval
- ospf set export-limit
- ospf set interface
- ospf set monitor-auth-method
- ospf set trace-options
- ospf set virtual-link
- ospf show
- ospf start|stop
- ping Command
- port Commands
- qos Commands
- reboot Command
- rip Commands
- save Command
- show Command
- snmp Commands
- statistics Commands
- stp Commands
- system Commands
- Command Summary
- system image add
- system image choose
- system image delete
- system image list
- system promimage upgrade
- system set bootprom
- system set contact
- system set date
- system set dns
- system set location
- system set name
- system set password
- system set poweron-selftest
- system set syslog
- system set terminal
- system show
- traceroute Command
- vlan Commands
Chapter 15: igmp Commands
15 - 6 SSR Command Line Interface Reference Manual
igmp show interfaces
Purpose
Shows the interfaces running IGMP.
Format
igmp show interfaces [group
<IPaddr>
|interface
<IPaddr>
]
Mode
Enable
Description
The
igmp
show
interfaces
command shows interfaces by name or by group. When
you use the command is to show interfaces by group, all interfaces containing the
group membership are shown.
Note:
This command is similar to
igmp
show
memberships
, except whereas the
igmp
show
interfaces
command shows interface details, the
igmp
show
memberships
command shows ports.
Parameters
group
<ipAddr>
Address of a multicast group.
interface
<ipAddr>
Address of a interface.
Restrictions
None.
Examples
ssr# igmp show interfaces
Address: 172.1.1.10 Subnet: 172.1.1/24 Met: 1 Thr: 1
Name : mls15 State: Up Querier Leaf Igmp Dvmrp
Address: 207.135.89.64 Subnet: 207.135.89.0/25 Met: 1 Thr: 1
Name : company State: Up Querier Leaf Igmp Dvmrp
Groups : 224.0.1.12
224.1.127.255
224.0.1.24
224.2.127.253
224.2.127.254