Network Router User Manual

Chapter 3: Bridging Configuration Guide
34 SmartSwitch Router User Reference Manual
Creating a non-IP/non-IPX VLAN
In this example, SNA, DECnet, and AppleTalk hosts are connected to et.1.1 and et.2.(1-4).
You can associate all the ports containing these hosts to a VLAN called ‘RED’ with the
VLAN ID 5.
First, create a VLAN named ‘RED’
Next, assign ports to the ‘RED’ VLAN.
ssr(config)# vlan create RED sna dec appletalk id 5
ssr(config)# vlan add ports et.1.1, et.2.(1-4) to RED