Network Router User Manual

Chapter 1: Introduction
10 SmartSwitch Router User Reference Manual
The following figure illustrates the configuration files and the commands you can use to
save your configuration:
Figure 1. Commands to Save Configurations
Erase commands in scratchpad. erase scratchpad
Erase startup configuration. erase startup
Negate one or more commands by line numbers. negate <line number>
Negate commands that match a specified command
string.
no <string>
Save scratchpad to active configuration. save active
Save active configuration to startup. save startup
Table 2. Commands to Display and Change Configuration Information
Task Command
StartupActive
Scratchpad
(config)# save active
(config)# save startup
temporary
location;
contents lost
at reboot
in effect
until reboot
remains
through
reboot