Network Router User Manual

Chapter 21: QoS Configuration Guide
302 SmartSwitch Router User Reference Manual
Monitoring QoS
The SSR provides display of QoS statistics and configurations contained in the SSR.
To display QoS information, enter the following commands in Enable mode:
Show all IP QoS flows.
qos show ip
Show all IPX QoS flows.
qos show ipx
Show all Layer-2 QoS flows.
qos show l2 all-destination all-flow
ports
<port-list> vlan <vlanID> source-mac
<MACaddr> dest-mac <MACaddr>
Show RED parameters for each
port.
qos show red [input port <port-list>|all-
ports][output port
<port-list>|all-
ports][port
<port-list>|all-ports]
Show IP or IPX precedence
values.
qos show precedence ip|ipx
Show WFQ bandwidth
allocated for each port.
qos show wfq [port <port-list> |all-
ports][input
<slot num>]|all-modules]
Show priority mappings.
qos show priority-map all