Network Router User Manual

SmartSwitch Router User Reference Manual 119
Chapter 11: OSPF Configuration Guide
• ospf show commands allow you to display detailed versions of the various OSPF
tables. The ospf show commands can only display OSPF tables for the router on which
the commands are being entered.
To display OSPF information, enter the following commands in Enable mode.
Show IP routing table.
ip show table routing
Monitor OSPF error conditions.
ospf monitor errors [destination
<hostname-or-IPaddr>]
Show information about all interfaces
configured for OSPF.
ospf monitor interfaces [destination
<hostname-or-IPaddr>]
Display link state advertisement
information.
ospf monitor lsa [destination
<hostname-or-IPaddr>]
Display the link state database.
ospf monitor lsdb [destination
<hostname-or-IPaddr> ]
Shows information about all OSPF
routing neighbors.
ospf monitor neighbors [destination
<hostname-or-IPaddr>]
Show information on valid next hops.
ospf monitor next-hop-list
[destination
<hostname-or-IPaddr>]
Display OSPF routing table.
ospf monitor routes [destination
<hostname-or-IPaddr>]
Monitor OSPF statistics for a specified
destination.
ospf monitor statistics [destination
<hostname-or-IPaddr> ]
Shows information about all OSPF
routing version
ospf monitor version
Shows OSPF Autonomous System
External Link State Database.
ospf show as-external-lsdb
Show all OSPF tables.
ospf show all
Show all OSPF areas.
ospf show areas
Show OSPF errors.
ospf show errors
Show information about OSPF export
policies.
ospf show export-policies
Shows routes redistributed into OSPF.
ospf show exported-routes
Show all OSPF global parameters.
ospf show globals
Show information about OSPF import
policies.
ospf show import-policies
Show OSPF interfaces.
ospf show interfaces