Specifications

SSR Command Line Interface Reference Manual 99
bgp add network
bgp add network
Purpose
Adds a network to a BGP peer group.
Format
bgp add network <ip-addr-mask>|all group <number-or-string>
Mode
Configure
Description
The bgp add network command lets you add a BGP peer network, thus allowing peer
connections from any addresses in the specified range of network and mask pairs.
Parameters
network <ip-addr-mask>|all
Specifies a network from which peer connections are allowed. Specify an IP
address and Mask value. Example: 1.2.3.4/255.255.0.0 or 1.2.3.4/16. Specify all to
add all networks.
group <number-or-string>
Specifies the group ID associated with this network range.
Restrictions
None.