Specifications

SSR Command Line Interface Reference Manual 97
Chapter 5
bgp Commands
The bgp commands let you display and set parameters for the Border Gateway Protocol
(BGP).
Command Summary
Table 5 lists the bgp commands. The sections following the table describe the command
syntax.
Table 5. bgp commands
bgp add network <ipaddr-mask>|all group <number-or-string>
bgp add peer-host <ipaddr> group <number-or-string>
bgp clear peer-host _ipaddr>
bgp create peer-group <number-or-string>
bgp set DampenFlap <option>
bgp set default-metric <num>
bgp set cluster-id <ipaddr>
bgp set peer-group <number-or-string>
bgp set peer-host <ipaddr>
bgp set preference <num>
bgp show aspaths <aspath>|all [to-terminal|to-file]
bgp show cidr-only <ip-addr-mask>|default|all [to-terminal|to-file]