Specifications

vlan make
890 SSR Command Line Interface Reference Manual
vlan make
Purpose
Configures the specified ports into either trunk or access ports.
Format
vlan make <port-type> <port-list>
Mode
Configure
Description
The vlan make command turns a port into a VLAN trunk or VLAN access port. A VLAN
trunk port can forward traffic for multiple VLANs. Use trunk ports when you want to
connect SSR switches together and send traffic for multiple VLANs on a single network
segment connecting the switches.
Parameters
<port-type>
The port type. You can specify one of the following types:
trunk-port
The port will forward traffic for multiple VLANs. The SSR will encapsulate all
traffic in IEEE 802.1Q tag headers.
access-port
The port will forward traffic only for the VLANs to which you have added the
ports and the traffic will be untagged. This is the default.
<port-list>
The ports you are configuring. You can specify a single port or a comma-separated list
of ports. Example: et.1.3,et.(1-3).(4,6-8).
Restrictions
None.