Specifications

vlan create
888 SSR Command Line Interface Reference Manual
sna
Create this VLAN for SNA traffic
ipv6
Create this VLAN for IPv6 traffic
bridged-protocols
Create this VLAN for extended VLAN types (DEC, SNA, Appletalk,
IPv6), and non-IP and non-IPX protocols
Note: You can specify a combination of ip, ipx, appletalk, dec, sna, ipv6, and bridged-
protocols. If you specify any of the extended VLAN types (sna, dec, appletalk,
ipv6) with the bridged-protocols option, then all the other extended VLAN types
are removed from the VLAN. See the following table:
port-based
Create this VLAN for all the traffic types listed above (port-based
VLAN)
Note: You can specify a combination of ip, ipx, appletalk, dec, sna, ipv6, and bridged-
protocols or you can specify port-based; you cannot specify port-based with any
of the other options.
id <num> ID of this VLAN. The ID must be unique. You can specify a number from
2 – 4093. If more than one SSR will be configured with the same VLAN, you
must specify the same VLAN ID on each SSR.
Restrictions
The following cannot be used for VLAN names:
• control
Configuration Command
Protocols Included in
VLAN
Protocols Excluded
from VLAN
vlan create <vlan-name> ip
IP
IPX, SNA, IPv6,
DECnet, Appletalk,
Other
vlan create <vlan-name> ip bridged-protocols
IP, SNA, DECnet, IPv6,
Appletalk, Other
IPX
vlan create <vlan-name> ip bridged-protocols
sna
IP, SNA, Other
IPX, IPv6, DECnet,
Appletalk
vlan create <vlan-name> ip bridged-protocols
sna ipv6
IP, SNA, IPv6, Other
IPX, DECnet,
Appletalk