Specifications

tacacs enable
860 SSR Command Line Interface Reference Manual
tacacs enable
Purpose
Enables TACACS authentication on the SSR. TACACS authentication is disabled by
default on the SSR.
Format
tacacs enable
Mode
Configure
Description
The tacacs enable command starts TACACS authentication on the SSR. When you issue
this command, the TACACS-related parameters set with tacacs set commands become
active.
Parameters
None.
Restrictions
None.
Example
The following commands set TACACS-related parameters on the SSR. The commands are
then activated with the tacacs enable command:
tacacs set host 207.135.89.15
tacacs set timeout 30
tacacs enable