Specifications

aging l3 set nat-flow-timeout
86 SSR Command Line Interface Reference Manual
aging l3 set nat-flow-timeout
Purpose
Set the aging time for NAT and LSNAT flows.
Format
aging l3 set nat-flow-timeout <minutes>|disable
Mode
Configure
Description
The aging l3 set nat-flow-timeout command sets the aging time for Network Address
Translation (NAT) and Load Sharing NAT flows. The aging time is specified in minutes.
Parameters
<minutes> The number of minutes the SSR allows for NAT and LSNAT flows. You can
specify from 2 to 120 minutes. The default is 2 minutes.
disable Disables NAT and LSNAT flow aging.
Restrictions
None.
Example
To set the NAT aging time to 5 minutes:
ssr(config)# aging l3 set nat-flow-timeout 5