Specifications

system show
858 SSR Command Line Interface Reference Manual
poweron-selftest-mode
Shows the type of Power-On Self Test (POST) that should be performed, if any.
scratchpad
Shows the configuration changes in the scratchpad. These changes have not yet
been activated.
startup-config
Shows the contents of the Startup configuration file.
switching-fabric
Shows the status of the switching fabric module. This command is valid only for
the SSR 8600.
syslog
Shows the IP address of the SYSLOG server and the level of messages the SSR
sends to the server.
syslog buffer
Shows how many Syslog messages the SSR’s Syslog message buffer can hold.
telnet-access
Lists the last five Telnet connections to the SSR.
terminal
Shows the default terminal settings (number of rows, number of columns, and
baud rate).
timezone
Shows the time zone offset from UCT in minutes.
uptime
Show how much time has elapsed time since the most recent reboot.
users
Shows the current Telnet connections to the SSR.
version
Shows the software version running on the SSR.
Restrictions
None.