Specifications

system show
856 SSR Command Line Interface Reference Manual
system show
Purpose
Show system information.
Format
system show <system-parm>
Mode
Enable
Description
The system show command shows the active settings for the following system
parameters:
• Active configuration (CLI configuration of the running system)
• Size of the Syslog message buffer
• Contact information for the SSR administrator (if you set one using the
system set contact command)
• Current system time and date (if you set them using system set date command)
• Time that has elapsed since the SSR was rebooted and the system time and date when
the last reboot occurred
• IP address(es) and domain name of DNS servers the SSR can use (if you set them using
system set dns command)
• Hardware information
• Location of the SSR (if you set one using the system set location command)
• System name of the SSR (if you set one using the system set name command)
• IP address or hostname of SYSLOG server and the message level (if you set these
parameters using the system set syslog command)
• Configuration changes in the scratchpad that are waiting for activation
• Software version running on the Control Module
• Last five Telnet connections to the SSR