Specifications

SSR Command Line Interface Reference Manual 839

system set dns

Purpose

Configure the SSR to reach up to three DNS servers.

Format

system set dns server [“]<IPaddr> [<IPaddr>] [<IPaddr>][“] domain <name>

Mode

Configure

Description

The system set dns command configures the SSR to reach up to three DNS servers. You

also can specify the domain name to use for each DNS query by SSR.

Parameters

[“]<IPaddr> [<IPaddr>] [<IPaddr>][“]

IP address of the DNS server. Specify the address in dotted-decimal notation. You can

specify up to three DNS servers separated by single spaces in the command line.

Note:

If you specify more than one IP address, you must surround the IP address

specification with a set of quotes.

<domain-name>

Domain name for which the server is an authority.

Restrictions

None.