Specifications

SSR Command Line Interface Reference Manual 823

system image add

Purpose

Copy a system software image to the SSR.

Format

system image add <IPaddr-or-hostname> <filename> [primary-cm] [backup-cm]

Mode

Enable

Description

The system image add command copies a system software image from a TFTP server into

the PCMCIA flash card on the Control Module. By default, if the SSR has two Control

Modules, the system software image is copied to both Control Modules.

Parameters

<IPaddr-or-hostname>

Is the IP address or host name of the TFTP server or a TFTP URL.

Is the name of the system software image file.

primary-cm

Copies the system software image only to the primary Control Module.

backup-cm

Copies the system software image only to the secondary Control Module.

Restrictions

None.