Specifications

SSR Command Line Interface Reference Manual 821
system hotswap
system hotswap
Purpose
Activates or deactivates a line card.
Format
system hotswap out|in slot <number>
Mode
Enable
Description
The system hotswap out command deactivates a line card in a specified slot on the SSR,
causing it to go offline. The command performs the same function as if you had pressed
the Hot Swap button on the line card.
The system hotswap in command causes a line card that was deactivated with the system
hotswap out command to go online again. The command performs the same function as if
you had removed the card from its slot and inserted it again.
See the SmartSwitch Router User Reference Manual for more information on hot swapping
line cards.
Parameters
out
Causes the line card in the specified slot to be deactivated.
in
Causes an inactive line card in the specified slot to be reactivated.
Note:
The system hotswap in command works only on a line card that was
deactivated with the system hotswap out command.
slot <number>
Is the slot where the line card resides. Specify 1-7 for the SSR 8000 or 1-15 for the SSR
8600.