Specifications

aging l2 set aging-timeout
82 SSR Command Line Interface Reference Manual
aging l2 set aging-timeout
Purpose
Set the aging time for learned MAC entries.
Format
aging l2 set <port-list>|all-ports aging-timeout <seconds>
Mode
Configure
Description
The aging l2 set aging-timeout command sets the aging time for learned MAC entries.
When the aging time expires for a MAC address, the SSR removes the MAC address from
the specified port(s). The aging time is specified in seconds.
Parameters
<port-list>|all-ports
The port(s) on which you want to set the aging time. You can specify a single
port or a comma-separated list of ports. If you use the all-ports keyword, the
aging time is set on all ports.
<seconds> The number of seconds the SSR allows a learned MAC address to remain in
the L2 lookup table (for the specified port). You can specify from 15 to
1000000 seconds. The default is 300 seconds.
Restrictions
None.