Specifications

SSR Command Line Interface Reference Manual 811
statistics show
statistics show
Purpose
Display statistics.
Format
statistics show <statistic-type> <port-list>
Mode
Enable
Parameters
<statistic-type>
The type of statistics you want to display. Specify one of the following. Some statistics
options apply system-wide, while others apply only to the Control Module.
System-wide statistics:
port-errors Shows error statistics for ports.
port-stats Shows normal (non-error) port statistics.
rmon Shows RMON statistics.
rarp Shows Reverse Address Resolution Protocol (RARP) statistics.
top Shows the most active tasks. Task usage is shown as both a
percentage of total CPU utilization and a percentage of other
tasks running on the system.
ip-interface <options> Shows IP interface statistics.
ipx-interface <options>Shows IPX interface statistics.
For ip-interface and ipx-interface, the interface name, input and output frames, and
input and output errors are displayed. However, you can use one or more of the
following <options> to control the type of information displayed:
packets Displays packet statistics.
bytes Displays byte statistics.
errors Displays error statistics.