Specifications

SSR Command Line Interface Reference Manual 807
snmp show
Restrictions
None.
Examples
The following command displays a log of SNMP access to the SSR. The host that accessed
the SSR and the SSR system time when the access occurred are listed.
To display the SNMP identity of the SSR:
To display the IP address of the trap target server:
ssr(confg)# snmp show access
SNMP Last 5 Clients:
10.15.1.2 Wed Feb 10 18:42:59 1999
10.15.1.2 Wed Feb 10 18:42:55 1999
10.15.1.2 Wed Feb 10 18:42:56 1999
10.15.1.2 Wed Feb 10 18:42:57 1999
10.15.1.2 Wed Feb 10 18:42:58 1999
ssr(confg)# snmp show chassis-id
SNMP Chassis Identity:
s/n 123456
ssr(confg)# snmp show trap
Trap Table:
Index Trap Target Addr Community String Status
1. 10.15.1.2 public enabled
2. 1.2.3.4 public123 disabled
3. 5.6.7.8 public20 disabled