Specifications

snmp disable trap
800 SSR Command Line Interface Reference Manual
snmp disable trap
Purpose
Disable specific SNMP trap types.
Format
snmp disable trap authentication|link-up-down
Mode
Configure
Description
The snmp disable trap command controls the types of traps the SSR emits based trap
type. You can disable the following trap types:
• Authentication – use the authentication keyword to prevent the SSR from sending a
trap each time it receives an invalid community string or invalid Telnet password.
• Link-state change – use the link-up-down keyword to prevent the SSR from sending a
trap each time a port changes operational state.
Parameters
authentication Disables authentication traps, which the SSR sends when it receives an
invalid SNMP community string or Telnet password.
link-up-down Disables link-state change traps, which the SSR sends when a port’s
operational state changes.
Restrictions
None.